Mira Response Shower Head Holder (White) 411.23

A: This will depend on the diameter of the rail.

A: Yes!

A: Unfortunately that part comes part of the complete shower head holder part number 411.23 in this link provided - http://www.showerdoc.com/mira-411-23-mira-response-clamp-bracket-assembly-(white)-411-23  

A: To find out what handset holder / slider bracket you need for your shower you just need to follow the steps below:

A) Measure the diameter accross the front rail it slides up and down EG; 18mm / 19mm / 22mm / 25mm

B) Choose the one yours most looks like and then make sure it has the correct diameter for your rail before ordering.

C) Make sure you choose the correct colour. 

You will find the range of Mira handset holder / sliders brackets with photos to compare with your current slider via this link provided - http://www.showerdoc.com/shower-accessories/slider-brackets/mira

If you find your holder is not listed then pease contact us by phone or via our contact us form with images via this link privoided to assist you - http://www.showerdoc.com/contact-us


  

A: The Response bracket will accept the head but as it fits a 22mil diameter riser rail check the dia of the rail fitted, the Response can be ordered on line using this link.

http://www.showerdoc.com/mira-411-23-mira-response-clamp-bracket-assembly-(white)-411-23

If your rail is a different diameter then click on this link which will take you to our range of Mira brackets and you can choose the correct one and order online.

http://www.showerdoc.com/shower-accessories/slider-brackets/mira

A: Yes it can be ordered onlihne by clicking on this link.

http://www.showerdoc.com/shower-accessories/slider-brackets/mira/MIRA-413-24-Mira-Clamp-Bracket-Assembly-(chrome)-For-22mm-Rail-413-24

A: It all depends on the dia of your riser rail not the shower. If you click on the link below it will take you to the available Mira brackets and you can choose the suitable one and order online.

http://www.showerdoc.com/shower-accessories/slider-brackets/mira

A: 

The Response clamp bracket is only suitable for 22mm rails

For 18mm rails you need http://www.showerdoc.com/shower-accessories/slider-brackets/mira/MIRA-421-43-Reflex-Clamp-Bracket-White---For-18mm-Rail

For 19mm rails you need http://www.showerdoc.com/shower-accessories/slider-brackets/mira/MIRA-439-05-Essentials-Clamp-Bracket-Assembly-White-(For-19mm-Rail)

A: Check the diameter of the riser rail and if it is 22mm then Response bracket will fit and can be ordered online by clicking on the link below.
It is fitted by removing riser rail and sliding on.

http://www.showerdoc.com/shower-accessories/slider-brackets/mira/MIRA-411-23-Response-Clamp-Bracket-Assembly-(White)

A: Yes this is the exact replacement part and can be ordered online by clicking on the link below

http://www.showerdoc.com/shower-accessories/slider-brackets/mira/MIRA-411-23-Response-Clamp-Bracket-Assembly-(White)

A: Yes this will fit and can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-accessories/slider-brackets/mira/MIRA-411-23-Response-Clamp-Bracket-Assembly-(White)

A: 

Hi Fiona

Sorry for the delay yes that bracket will fit all Sports except this one.

http://www.showerdoc.com/shower-spares/mira/MIRA-PARENT-17-Mira-Sport---post-1996

George

A: This clamp / bracket assembly is for a 22MM dimeter rail and will fit the response range fittings that are supplied with the Mira advance ATL

Here is a link to the product to puchase - http://www.showerdoc.com/product-filter?ss=411.23