Q: I have a Triton TS80i and replaced the showerhead and hose a few months back but the new Triton 7000 series showerhead seems heavier and has caused the holder to crack. I need a new holder, but I want to make sure its going to be strong enough to take the weight. Will the Triton holder 83313470 be ok? The rail is measuring 22mm.
Thanks
|
|
|
Submitted 43 days ago | by
Jules, Liverpool
A: Yes this holder should be strong enough The existing holder could have become brittle with age orperhaps a miss matched hose. You may want to have a look at this video http://www.youtube.com/watch?v=kTkaVmTdWIk Answered 42 days ago | The Doc
|
|
|
Q: Will this showerhead holder fit my AS1000 power shower as I believe you no longer stock for this shower
|
|
|
Submitted 89 days ago | by
pauline, Southend, Essex
A: You will need to measure the diameter of the pole that you want to fit this to, to see if is compatible. Answered 86 days ago | Barrie
|
|
|
Q: I need a new shower head holder for a Triton Trance shower please could you tell me where to get one in the Northallerton area of North Yorkshire?
|
|
|
Submitted 220 days ago | by
anni, Northallerton
Answered 220 days ago | The Doc
|
|
Q: I have a triton combi HP thermostatic Mixer Shower approx 9 years old.
Is the 83313470 shower holder suitable? In the original leaflet the spare part number was listed as 83306190 which I am unable to find.
Many thanks
|
|
|
Submitted 229 days ago | by
Dordor, Woodford, Essex
Answered 227 days ago | Alastair
|
|
|
Q: i need a shower head holder for a shower called ivory II what size will i need please
|
|
|
Submitted 234 days ago | by
emma, west midlands
Answered 233 days ago | Alastair
|
|
Q: I have a Triton Passion shower (8 year old
model) which needs the shower head holder
replaced. I'm just wondering if the 83313470
is the most suitable spare holder I can get??
|
|
|
Submitted 240 days ago | by
Sonnydubh, Isle of Lewis
A: Good afternoon, Thank you for your email. Before ordering a shower head holder it is important to measure the diameter of the pole on to which you will fit this part. This is important because Triton have manufactured several of these parts down the years, all to suit different diameters of pole. Once you have obtained the relevant measuement, please follow the link below where you will find a part to suit. http://www.showerdoc.com/shower-accessories/slider-brackets/tritonI hope that this helps you out. Regards, Michael. The Shower Doctor. Answered 239 days ago | Anonymous
|
|
|
Q: I need a new showerhead holder for my Triton T80z will this one fit it.
|
|
|
Submitted 245 days ago | by
none, London
A: Good morning, Thank you for your email. Before ordering a shower head holder it is important to measure the diameter of the pole on to which you will fit this part. This is important because Triton have manufactured several of these parts down the years, all to suit different diameters of pole. Once the relevant measurement has been obtained, please follow the link below where you will find a part to suit... http://www.showerdoc.com/shower-accessories/slider-brackets/tritonI hope that this helps you out. Regards, The Shower Doctor. Answered 245 days ago | Anonymous
|
|
|
Q: Is the Triton Showerhead Holder 22mm 83313470 suitable for a Triton T70si?
|
|
|
Submitted 248 days ago | by
Jane, York
A: Good morning, Thank you for your email. Before ordering a shower head holder it is important to measure the diameter of the pole on to which you will fit this part. This is important because Triton have manufactured several of these items down the years, all to suit different diameters of pole. Once you have obtained the relevant measurement, please follow the link below where you will find a part to suit... http://www.showerdoc.com/shower-accessories/slider-brackets/tritonI hope that this helps you out. Regards, The Shower Doctor. Answered 248 days ago | Anonymous
|
|
Q: Will the triton showerhead holder 22mm white
83313470 fit a triton t90si shower
|
|
|
Submitted 252 days ago | by
DON, Northern Ireland
A: Good morning, Thank you for your email. Before ordering a shower head holder it is important to measure the diameter of the pole on to which you will fit this part. This is important becasue Triton have manufactured several of these parts down the years, all to suit different diameters of pole. Once you have obtained the relevant measurement, please follow the link below where you will find a part to suit... http://www.showerdoc.com/shower-accessories/slider-brackets/tritonI hope that this helps you out. Regards, The Shower Doctor. Answered 252 days ago | Anonymous
|
|
Q: Will this holder fit the Triton Aquatronic 1 + model?
|
|
|
Submitted 252 days ago | by
jdee, Berkshire
A: Good morning, Thank you for your email. Before ordering a shower head holder it is important to measure the diameter of the pole on to which you will fit this part. This is important becasue Triton have manufactured several of these parts down the years, all to suit different diameters of pole. Once you have obtained the relevant measurement, please follow the link below where you will find a part to suit... http://www.showerdoc.com/shower-accessories/slider-brackets/tritonI hope that this helps you out. Regards, The Shower Doctor. Answered 252 days ago | Anonymous
|
|
|
Q: Will the sprayhead holder 83313470 fit my Triton Martinique ?
|
|
|
Submitted 261 days ago | by
Kev, Norfolk
Answered 261 days ago | Alastair
|
|
Q: Hi Doc, I have the Triton Amber II and my riser rail is 19mm Dia, will the 83313470 still lock on the19mm dia.or will it be too loose.If not can you point me in the right direction for another replacement
Regards Jim.
|
|
|
Submitted 266 days ago | by
jimmo, Newcastle ,Tyne&Wear
Answered 265 days ago | LC
|
|
|
Q: does this item fit Triton T70 XR and does it include the plastic holder to hold the holder in place
|
|
|
Submitted 290 days ago | by
glyn, gwynedd
Answered 289 days ago | The Doc
|
|
|
Q: is this suitable for the triton t80xr
|
|
|
Submitted 293 days ago | by
butch, coventry
A: Good afternoon, Thank you for your email. Before ordering a showerhead holder it is important to measure the diameter of the pole on to which you will fit this part. This is important because Triton have manufactured several shower head holders down the years, all to suit different diameters of pole. Once you have obtained the relevant measurement, please follow the link below to order the required part from our website... http://www.showerdoc.com/shower-accessories/slider-brackets/tritonI hope that this helps you out. Regards, The Shower Doctor. Answered 293 days ago | Anonymous
|
|
|
Q: please advise suitable shower head holder for shower force mirage power shower model
|
|
|
Submitted 294 days ago | by
Scottie, Blackpool.Lancs
A: Good morning, Thank you for your email. Before ordering a shower head holder it is important to measure the diameter of the pole on to which you will fit this part. This is important because many different shower head holders have been manufactured down the years, all to suit different diameters of pole. Once you have obtained the relevant measurement, follow the link(s) below to order the required part. http://www.showerdoc.com/shower-accessories/slider-brackets/tritonNb. In some Showerforce / NewTeam showers the riser rail was not a standard cylindrical shape, but more of a flat pole. Here the shower head holder gripped the pole at either side. If this sounds like your shower head holder, then please follow the link below to view (and order, if you like) this particular part on our website... (This particular part is the bottom two of the 4 shown in the list) http://www.showerdoc.com/shower-accessories/slider-brackets/newteam?id=659&n=659&cid=0&rid=0&catid=0&lid=1&dptid=10&cty=1589&range=28I hope that this helps you out. Regards, The Shower Doctor. Answered 293 days ago | Anonymous
|
|
|
Q: i have a triton dove bar mixer shower but the threading of the shower head and hose are damaged. where can i buy replacement head and hose.
|
|
|
Submitted 301 days ago | by
bren, Kildare, ireland
Answered 300 days ago | Alastair
|
|
|
Q: whats the black square of rubber for and how do you fit this to the shower
|
|
|
Submitted 307 days ago | by
aly, surrey
A: It is the part that creates the friction that holds the holder in place.
You need to undo the top or bottom mounting bracket slip the old holder off and the new one on. Answered 307 days ago | The Doc
|
|
|
Q: Can you please advise which showerhead holder is suitable for a Triton Jade electric shower.
|
|
|
Submitted 312 days ago | by
John, Liverpool
Answered 310 days ago | LC
|
|
Q: Hi I have the T80XR shower (alfie) is this the correct shower head holder for this model as the insert has cracked and needs replacement. the part we have is white and looks similar to this. thank you for your response
|
|
|
Submitted 320 days ago | by
charliemouse, telford
Answered 318 days ago | Alastair
|
|
|
Q: Can you tell me which shower head holder i can use for the Amber 2 shower please
|
|
|
Submitted 329 days ago | by
jimmo, Newcastle Tyne&Wear
Answered 329 days ago | The Doc
|
|
Q: Does this fit the Triton Rapid 4 ?
(used to be part 83306190)
|
|
|
Submitted 336 days ago | by
bobb, Devon
A: Good afternoon, Thank you for your email. If your riser rail is 22mm in diameter then this shower head holder will fit on to the pole. However, should your pole measure a different diameter then please follow the link below where you should find a part to suit... http://www.showerdoc.com/shower-accessories/slider-brackets/tritonI hope that this helps you out. Regards, The Shower Doctor. Answered 335 days ago | Anonymous
|
|
|
Q: is the 22mm 83313470 suitable? or is there one more suitable
|
|
|
Submitted 337 days ago | by
Clive, Cheltenham, Glos
A: Yes this is now the correct holder for this shower Answered 337 days ago | The doc
|
|
|
Q: Looking for a white shower head holder for Triton Bermuda have you got anything compatible
|
|
|
Submitted 354 days ago | by
mikeyd, Wolverhampton
Answered 351 days ago | Alastair
|
|
|
Q: Does the part include the rubber/plastic washers that the original has? This is the reason I'm looking for a replacement. Thanks.
|
|
|
Submitted 355 days ago | by
Doc, Meath, Ireland.
Answered 351 days ago | Alastair
|
|
|
Q: i have an Ivory II would this be suitable?
|
|
|
Submitted 366 days ago | by
b, scotland
Answered 355 days ago | LC
|
|
|
Q: need showerhead holder for triton t90si riser rail
|
|
|
Submitted 385 days ago | by
pete, dublin ireland
Answered 384 days ago | LC
|
|
|
Q: Have you got a shower head holder for above without rail
|
|
|
Submitted 409 days ago | by
bluebird, Ireland
Answered 409 days ago | The Doc
|
|
|
Q: how do i fit new holder i have ordered
|
|
|
Submitted 481 days ago | by
mary, bangor co down n ireland
A: Remove slider rail from wall and remove old gracket then hold down button on new bracket and slide on to rail and refit rail to wall. Answered 477 days ago | Alastair
|
|
|
Q: how to take old one off and fit new holder
|
|
|
Submitted 485 days ago | by
mary, n.ireland
A: Removal of shower head holder 83313470:
There will be a cap on the top bar support of your rail kit , you will then find a small square gap between the support and cap covering the screw for the removal of the cover, remove this cap with a flat end screw driver without damaging the plastic cap / cover, once this is removed you will uncover the screw holding the support to the wall, unscrew the screw and remove the support from the wall and the rail will ease away from the bottom rail support which will still be attached to the wall.
Position the slider tightening handle into the adjustable positions it runs freely up and down the rail and the broken slider can be removed off the rail remembering which way it comes off for the re fitting of the new slider / handset holder, then re replace with the new slider / handset holder and repeat the above in reverse assembling the rail once again. Answered 485 days ago | LC
|
|
|
Q: I have the triton dove mixer chrome shower, the part that holds the shower head has cracked & snapped, which spare part do i need, will the alfie shower head holder fit, i require this part in white.
|
|
|
Submitted 488 days ago | by
alibaz, Durham
Answered 488 days ago | LC
|
|
|
Q: I have a Triton T100E Jan 1995 model will this be compatable also do you still stock white hoses
|
|
|
Submitted 663 days ago | by
chip
Answered 661 days ago | Alastair
|
|
Q: I have a trident aqua sensation power shower and a t90 si electric shower.The holder for both shower heads that adjusts up and down has cracked. I am just wondering what showerhead holder would suit both showers. I have measured the bar rail and its 22mm in diameter.
Regards,
Gary
|
|
|
Submitted 737 days ago | by
gary
|
|