Bristan

Hydropower Duraspeed Shower Booster Pump 70

Product Code: BRIST-HY-PUMP70

Product Discontinued
This product has been discontinued and is no longer available.

We have sold our remaining stock and there are no direct replacements, however if you wish to discuss your options, please do not hesitate to contact us

You might also be interested in

(7)

Universal Superstrong Shower Hose 150cm - 52820

R.R.P £16.80
Our Price
£10.96
Sale
In Stock
(8)

Euroshowers C-Jet Wras Approved Chrome - 56620

R.R.P £16.80
Our Price
£13.80
Sale
In Stock

Product Description

  • Twin impeller (2.0 bar)
  • Variable speed control for flow and pressure adjustment.
  • Supplied with four flexible connectors
  • 2 year manufacturer’s guarantee

Product Specification

  • Guarantee: 2 Years
  • Head Type: Positive Head
  • Height: 190mm
  • Impeller Type: Centrifugal
  • Max Pressure Rating: 2.0 Bar
  • Pump Type: Twin Impeller
  • Width: 260mm
Product Specification                                    
Product Code:  HY PUMP70 
Pump Type:  Variable speed twin impeller 
Inlet Connections:  Flexible hose – 15mm push fit 
Outlet Connections:  Flexible hose – 15mm push fit 
Pump Rating:  2.0 bar 
Stalled Pressure:  1.9 bar 
Motor Rating:  15 minutes on / 60 minutes off 
Supply:  Suitable for gravity systems only
 AdditionalInformation 
•  Variable speed twin impeller pump driving both hot and cold supplies to boost shower power up to 20 times.  
•  Pump rated at 2.0 bar pressure equivalent to 20 metres (70’ head). 
•  Vibration free and gives noise reduction of up to 30% over similar pumps. 
•  Pump supplied with 15mm push fit inlet and outlet connections. 
•  Inlet connection washers with integral filters. 
•  Minimum 115 litres (25 gallon) cold water tank capacity recommended. 
•  Pump requires 230 Volt AC supply fused at 3 amps via a double pole isolator with contact gap of at least 3mm. 
•  Pump fitted with mains supply cable. 
•  Power consumption – 280 W (fuse rating – 3 A). 
•  Pump must be protected by a 30ma RCD (Residual Current Device). 
•  For optimum performance pump should have dedicated hot and cold water supplies direct from cold water tank  
   and hot water cylinder (preferably using an Essex flange on hot cylinder). 
•  Under no circumstances should the pump be connected to mains water supply. 

Guarantee:  2 years covering manufacturing faults  

FAQs (7)

Do you have a question regarding this product?
Call us directly 0131 538 4343 or click the button to ask us a question.


Ask a Question

REVIEWS

Have you purchased this product from Shower Doctor?
Why not leave a review here and help other buyers that are looking.

Submit a review for this product

Be the first to write a review about this product.