auto reseting

our Galaxy Aqua 3000 was fitted about 3 years ago.On the shower facia, there are two indicator lights for power and auto-reset.



The problem seems to be that the shower cannot maintain a stable temperature for a period longer than five minutes.We tend to start it at the maximum heat and lowest water speed which generally works but the water becomes unbearably hot. When you turn down the temperature control to a bearable temperature it work for a short while and then auto-resets
Asked 10 years ago by Anonymous

The things to check first are.

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water
getting to your shower to cool it properly, the overheat safety device will turn
the power off until it cools, then it then it starts to heat again and so on.

 

Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally

The other possibility is a faulty flow/stabilizer valve not allowing the correct amount of water into the shower. 
 

Answered 10 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Galaxy Aqua 3000 (Electric Shower) - Post 2000 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Galaxy Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Galaxy Electric Showers

For any other support request please get in touch.