This question is regarding Galaxy Aqua 3000 (Electric Shower) - Post 2000 - Shower Spares

microswitch problem

The water wasn't heating up fully, when I checked the power selector the 2 microswitches were still open. I have put a shim pf plastic card in, so with the power selector on hot both switches are closed. The shower now heats up, but when I switch off the auto reset comes on, I can't remember if this happened before.
Asked 11 years ago by Anonymous

It sounds very much like that the switches that you have shimmedare not switching off!

If you have had to fit shims then that points to some otherproblem....Low pressure?

Answered 11 years ago by The Shower Doctor

Thanks for the quick reply, the pressure switch seems to be working the microswitches ok now after removing the shims, I think the switch may have been a bit sticky

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Galaxy Aqua 3000 (Electric Shower) - Post 2000 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Galaxy Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Galaxy Electric Showers

For any other support request please get in touch.