MENU

Heatrae Sadia Carousel Slimline Shower Spares

SADIA-PARENT-12

Heatrae Sadia
Heatrae Sadia Carousel Slimline Shower Spareshover to zoom or click to enlargeclick here to view full size

Product Details

Spares
Questions and Answers
Do you have a question regarding this product? Call us on directly 0131 538 4343 or ask us a question now. ? Ask new question

Please fill out the form below to submit your question

You browser doesn't have Flash, Silverlight, Gears, BrowserPlus or HTML5 support.

You browser doesn't have Flash, Silverlight, Gears, BrowserPlus or HTML5 support.

Carousel slimline serial no. 019228 1 Answer

Q: This is a very old unit! It works fine for about 2 minutes then cuts off completely. Leave it for 5 minutes and it works again for another 2 minutes. Help?

Submitted 130 days ago | by Jacjac, London
! Answer this question

A: It maybe your solenoid valve, you can check it if you have a multi meter, you shouldhave a reading of at least k3.5 ohms, across the two terminals any less and youneed a new valve. (Check the valve in the failed state.) (When it has stoppedworking!)

If thereis power getting to the solenoid and it is not operating then there is a goodchance that you have a faulty solenoid.

http://www.youtube.com/watch?v=NzJjzWqxesc

The video is intended as a guide and does not cover every shower.

If youdon’t have a multimeter we sell them with a guide on how to usethem for checking and testing the various parts of your shower.

Apart from helping to fix your shower, they are really useful forchecking you have a power supply to appliances, for checking fuses and lettingyou know much power you have left in batteries

(So youwill know if they are good or not) and lots of other jobs, in short they arewell worth a few pounds

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

Answered 130 days ago | Barrie
Heatrae Sadia Carousel remove cover 1 Answer

Q: How do you remove the front panel after removing the screw at the bottom of the unit? Is a bit of brute force required, if so where should it be applied?

Submitted 206 days ago | by Nottaplummer, Leics
! Answer this question

A: Remove the screw atthe bottom and the knobs then I can’t remember if it hinges up and forward orif there two screws in the top.

If there screws they should be obvious unless they arecovered in silicon or grout.

Answered 206 days ago | The Doc
Leaking Shower Casing 1 Answer

Q: Water has started to drip from the casing when the shower is running. Isolated and removed the shower cover and can see water coming from some sort of diaphagm thing near the bottom.

It has a part number: NOVOMEC PSS.1-2.H



What the hell is it and can I replace it? It's an oldish shower. Heatrae Sadia Carousel Slimline.

Submitted 276 days ago | by pedantic, Buckinghamshire
! Answer this question
A: http://www.showerdoc.com/gainsborough-switch-pressure-95613527

If this is not the part that is leaking then I am afraid it is a new shower that you need.Answered 276 days ago | Barrie
Heatrae Sadia Carousel Slimline 1 Answer

Q: Recently my shower has only cold water coming from it.Also there is alot of water coming from the bottom of the shower where the hose enters.

I have not managed to take the casing of as the screw at the bottom is rusted in.

could you please give me some advise.

yours faithfully



Iain

Submitted 584 days ago | by Iain, devon
! Answer this question

A:

I think the Pressure Relief Device (PRD) has blown.

It’s a safety device on the bottom of the heating tank.

It is fairly easy to replace however there is usually something that causes it to blow, often a kink in the hose or the shower head is blocked, so check this before fitting the new PRD.

http://www.showerdoc.com/shower-spares/heatrae-sadia/gns-95607523-gainsborough-pressure-relief-device-8-5kw-95607523

Answered 584 days ago | Barrie
heatrae sadia carousel slimline 1 Answer

Q: The solenoid switch (240v) on the shower has gone kaput - will the Gainsborough part no. 95605425 fit?

Submitted 618 days ago | by big al, huddersfield
! Answer this question
I dont know if the solenoid valve 95605425 will fit but you could just change the solenoid,
A:
http://www.showerdoc.com/shower-spares/other-brands/hydr-27600-solenoid-coil-universal-(no-valve)-hydr-27600Answered 618 days ago | Barrie
heatrae sadia carousel slimline 1 Answer

Q: Is there any shower available which will fit into the Heatrae Sadia Carousel Slimline overbath housing unit? Needs to be no more than 8.5kw, size to fit in approx. 110mm wide x 230mm high x 70mm depth

Submitted 625 days ago | by big al, huddersfield
! Answer this question

A: No I am afraid not.

Unfortunately there is nothing that is a directswap.

However.......Triton has recently brought out the T80Z Fast Fit this shower has been designedround being a retrofit unit. 

Thepipe work can be brought in from almost any position and there is a reasonableamount of space for cable entry from most positions.

Hereis the link.

http://www.showerdoc.com/showers/triton/electric-showers/ZTRITO-SP8008ZFF-Triton-T80Z-Fast-Fit-8-5kW-Electric-Shower---White-Chrome?pg=2

Answered 625 days ago | The Doc
Unable to switch shower off 1 Answer

Q: The water continues to flow even with the power off. The only way to stop the water is to turn the thermostat up high until the low flow light comes on and then turn the power off.

Submitted 688 days ago | by Anonymous, Norfolk
! Answer this question

A: If when you switch off the shower at the main isolatorand the shower keeps running then you have a faulty solenoid.

 

When you switch off the shower at the mainisolator and the water stops running, then you have a faulty on/off switchor a faulty PCB or a micro switch that is sticking on.

Answered 688 days ago | The Doc
Heatrae sadia carousel slimline pressure switch 1 Answer

Q: Hi, I need a replacement pressure switch for the carousel slimline. I think they are obselete. Will the gainborough version 95613527 work. Least ways I think it is a pressure switch, it is shown in the photo with two red leads going to it



If not can you recommend a shower that will fit into the Heatrae sadia overbath panel?



Please see pictures

Submitted 968 days ago | by Andrew, Coventry
! Answer this question
h carousel slimline 1 Answer

Q: my shower does not get very hot

Submitted 981 days ago | by toto, norwich
! Answer this question

A: It may be a faulty element in the heating tank (there are two, three in most 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.

If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably a micro switch.

 

If you don’t have a multimeter  we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.

 

Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries

(so you know if they are dud or not)  and lots of other jobs, in short they are well  worth the £10.

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

Answered 981 days ago | The Doc
Heatrae Sadia HEAT CONTROL 1 Answer

Q: I can only get cold water fram my shower regardless of where I set the heat control.This has only hapend recentley.

Submitted 1026 days ago | by LEON, SS8 7HL
! Answer this question

A: If the shower is absolutely cold then I think you may have a faulty Thermal Cut Out
A faulty TCO will have no continuity across the two terminals (The black thing on top of the heating tank)
Therefore a good TCO will have power at both connections and a faulty TCO will have power at only one.
(The function of the TCO is, if the water over heats it cuts the power off to the elements)

See Video.

http://www.youtube.com/user/showerdoc#p/u/2/_zi8JbEMYMs

If there is some heat it may be a faulty element in the heating tank (there are two, three in most 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.

If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably a micro switch.

 

If you don’t have a multimeter  we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.

 

Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries

(so you know if they are dud or not)  and lots of other jobs, in short they are well  worth the £10.

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

Answered 1026 days ago | The Doc
CAROUSEL SLMLINE 1 Answer

Q: NO HOT WATER FROM SHOWER

Submitted 1180 days ago | by LEON, CANVEY ISLAND, ESSEX
! Answer this question
Check the thermal cut out on top of the heating can for continuity. If openb circuit a replacement can be ordered online by clicking on the link below.
A:
http://www.showerdoc.com/shower-spares/heatrae-sadia/GNS-95612572-Gainsborough-Thermal-Cut-Out-95612572Answered 1180 days ago | Alastair
pressure switch 1 Answer

Q: i am looking for a pressure switch for an heatrae sadia carousel sliline shower, It is about 20 years old and has served us very well over the years and i want to keep it if possible, the switch is corroded on the bottom and starting to leak,is it possible to purchase a new one. look forward to your reply.Joe.

Submitted 1276 days ago | by joe
! Answer this question
A: Part noe obsolete Answered 1275 days ago | The Doc
Customer Reviews
Be the first to write a review about this product.
Related Spares

Please call for more information on available spares for this product