Mira sport 10.8kw flow and heat issues

Had some issues with the mains water one day......shower was working fine then mid shower the flow went way down and spluttered.....mains water fixed now but he shower flow is low at med/high temp and the heat setting needs to be all the way to get warm water. Thanks for the help in advance :)
Asked 9 years ago by Anonymous

It may be a faulty element in the heating tank (there are two, three in most 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.

If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably a micro switch.

http://www.youtube.com/watch?v=wzPt1hsfVq4


If you don’t have a multimeter  we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.


Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries

(so you know if they are dud or not)  and lots of other jobs, in short they are well  worth the £10.


http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

Answered 9 years ago by Anonymous

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Azora/Sprint/Sport/Zest Thermal Cut-out (TCO) - 416.41

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Thermal Cut Outs Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Thermal Cut Outs

For any other support request please get in touch.