8.7kw Advance replacement

I am using a 8.7kw Advance on 6mm cable. Installed in 1997. I wanted a direct replacement for my unit but unfortunately the new version is only made as a 9 or 9.8kw unit - I am concerned that that the 9kw unit will be to much of a load on my existing cabeling. Do any of your other 8.7kw units have the same entry point etc for water and electricity.

Is there any way I can get my hands on a complete old version of the Advance?
Asked 13 years ago by Anonymous
The 6.0sqmil cable is adequate for the 9.0kw Advance which can be ordered online by clicking on the link below. Can`t help with the old model I`m afraid.

http://www.showerdoc.com/showers/mira/electric-showers/ZMIRA-1-1643-005-Mira-Advance-ATL-Flex-Electric-Shower-9-0kW?pg=2

Answered 13 years ago by Anonymous

Hi, Need to replace an old mira advance electric shower unit, which new mira shower will fit the existing water and cable connections. Thank you,

Adam Kulik.

Answered 9 years ago by adam kulik

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Advance Standard - post 1995 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.