Mira

Mira Coda Plus EV

Product Code: ZMIRA-2.1712.003

Product Discontinued
This product has been discontinued and is no longer available.

We have sold our remaining stock and there are no direct replacements, however if you wish to discuss your options, please do not hesitate to contact us

You might also be interested in

(7)

Universal Superstrong Shower Hose 150cm - 52820

R.R.P £16.80
Our Price
£10.96
Sale
In Stock
(8)

Euroshowers C-Jet Wras Approved Chrome - 56620

R.R.P £16.80
Our Price
£13.80
Sale
In Stock

Product Description

  • Sleek exposed bar valve
  • Thermostatic technology ensures a safe and comfortable shower every time
  • Three spray adjustable showerhead
  • Complete with Bar Valve Fixing Kit
  • 5 year guarantee

Product Specification

With its sleek exposed bar valve, Mira Coda puts control at your fingertips, while thermostatic technology ensures a safe and comfortable shower every time.

  • Thermostatic temperature stability keeps the showering safe for all the family
  • A maximum temperature stop enhances safety – you can override it if you want a hotter shower
  • Separate temperature and flow controls let you fine tune your perfect shower
  • 3-spray showerhead with rub-clean rubber nozzles makes cleaning easy
  • Clean chrome finish
  • Suitable for all plumbing systems
  • 5 year guarantee


Technical Information
This fully thermostatic shower control mixes hot and cold water to the desired showering temperature. It automatically compensates for variation in both the temperature and the pressure of the inlet water supplies to maintain the blend temperature.

Limitations of Use
The Mira Coda should not be used for applications where an outlet flow control forms part of the shower fitting.
The product and its components are only suitable for normal water supplies and should be cleaned only with mild washing up detergent or soap solution.

Temperature
Maximum inlet hot water temperature: 90°C for short periods (BS6700 recommends a maximum of 65°C).
Minimum inlet hot water temperature: 55°C
Minimum temperature differential between blend and hot: 12°C
Hot and cold supplies to be at a nominally equal pressure.
Maximum pressure imbalance: 5:1

Pressure (inlet supplies)
Minimum pressure: 0.1 bar
Maximum maintained pressure: 5.0 bar
Maximum static pressure: 10.0 bar

Performance
Flow rate is fully adjustable
Temperature is user selectable from full cold to a factory set safe maximum, which can be over-ridden by the user if required.
Wax capsule thermostatic cartridge technology controls outlet temperature stability between 20°C and 50°C.
Optimum thermostatic control between 35°C and 45°C (the specification outlined below is achieved with the inlet water supply temperature of 15°C cold and 65°C hot and nominally equal inlet supply pressures.
The blended water temperature is maintained within 2°C with a 10°C change in either got or cold supply.
The Mira Coda will effect a shutdown seepage in typically two seconds if either the hot or cold supply fails (note: shutdown to seepage will only occur if the hot supply is more than 10°C above the blend temperature).

Guarantee

Guaranteed for five years from date of purchase against faulty materials or workmanship.

Application
The Mira Code is suitable for installation as part of the following plumbing systems:
Gravity fed
Fully modulating instantaneous gas heated
Mains pressurised (heated from a thermal store)
Unvented mains pressure
Pumped

When the Mira Coda is used with mains pressure appliances at pressures above 5.0 bar maintained, a drop-tight pressure reducing valve must be installed to maintain performance.

Installation
The plumbing installation must comply with the requirements of UK Water Regulations/Bylaws (Scotland), Building Regulations or any particular regulations and practices specified by the local water company or water undertakers.
The installation should be carried out by a plumber or a contractor who is registered or is a member of an association.
Protect the product from damage whilst making soldered connections. Some fluxes cause damage to plastic components.

Mira Coda Thermostatic Shower Valve
Adjustable inlet elbows accept rear entry supplies.
Variable inlet centres: 126mm – 174mm
Inlet connections: ½” BSP male
Outlet connections: ½” BSP male

FAQs

Do you have a question regarding this product?
Call us directly 0131 538 4343 or click the button to ask us a question.


Ask a Question

Be the first to ask a question about this product.

REVIEWS

Have you purchased this product from Shower Doctor?
Why not leave a review here and help other buyers that are looking.

Submit a review for this product

Be the first to write a review about this product.