Mira Discovery EV Exposed Concentric Mixer with Shower Kit (Chrome) - 1.1595.001
Product Discontinued
This product has been discontinued and is no longer available.
We have sold our remaining stock and there are no direct replacements, however if you wish to discuss your options, please do not hesitate to contact us
You might also be interested in
Mouldcure Pink and Black Mould Removal Spray (1 litre bottle) - HC0028/1-1/SHO
Product Description
- Thermostatic temperature stability keeps showering safe for all the family
- Separate temperature and flow controls let you fine tune your perfect shower
- 4-spray showerhead with partial rub-clean rubber nozzles
- Approved to TMV2 standards, which means you know its thermostatic control is the very highest quality
- Mira Discovery matching taps available
- Comes with a clean chrome finish
Product Specification
- Colour: Chrome
- Depth: 126mm
- Fitment Style: Exposed
- Guarantee: 3 Years
- Height: 106mm
- Inlet Connection: 15mm Compression
- Minimum Running Pressure: 0.1 Bar
- Plumbing System: Low Pressure
- Temperature Control: Thermostatic
- Water Entry: Back
- Width: 173mm
Principle of Operation
This full thermostatic shower control has independent controls for spray force and temperature selection, it mixes got and cold water to the desired showering temperature. It automatically compensates for variation in both the temperature and pressure of the inlet water supplies to maintain the blend temperature. If the cold supply fails the shower will automatically shutdown to prevent scalding.
Limitations of Use
The Mira Discovery should not be used for applications where an outlet flow control forms part of the shower fitting.
Temperature
Maximum inlet hot water temperature: 85°C (BS6700 recommends a maximum temperature of 65°C).
Minimum temperature differential between blend and hot: 12°C
Hot and cold supplies to be at nominally equal pressure
Pressure
Minimum pressure: 0.1 bar
Maximum maintained pressure: 5.0 bar
Maximum static pressure: 10 bar
Maximum pressure imbalance: 5:1
Performance
The specification performance outline below is achieved with inlet water supply temperatures of 15°C cold and 65°C hot and nominally equal inlet pressures.
Temperature selection rang: full cold to preset maximum (factory set is 43°C)
Thermostatic temperature control is achieved in the range 35°C – 45°C
The blended water temperature is maintained within 2°C with a 10°C change in either the hot or cold supply temperatures.
Shutdown to seepage in the typically two seconds if either the hot or cold supply fails provided the hot supply is more than 12°C above the blend temperature.
The blended water is maintained within 2°C range, when the pressure of either supply is reduced by 50%.
For high pressure supplies a flow regulator (supplied) should be fitted to the outlet.
Guarantee
Guaranteed for three years from date of purchase against faulty materials or workmanship.
Applications
Mira Discovery is suitable for installation as part of the following plumbing systems:
Gravity fed
Fully modulating instantaneous gas heated
Mains pressurised (heated from a thermal store)
Unvented mains pressure
Pumped
When the Mira Discovery is used with mains pressure appliances at pressures above 5.0 bar maintained, a drop-tight pressure reducing valve must be installed to maintain performance.
Installation
The plumbing installation must comply with the requirements of UK Water Regulations/Bylaws (Scotland), Building Regulations or any particular regulations and practices specified by the local water company or water undertakers.
The installation should be carried out by a plumber or a contractor who is registered or is a member of an association.
Protect the product from damage when making soldering connections. Some fluxes may cause damage to plastic components.
Mira Discovery Surface-mounted (shower control only)
Inlet elbows accept falling, rising or rear entry supplies
Inlet connections: 15mm compression
Outlet connection: ½” BSP flat face
Reversed inlet supplies supported
Alternative top or bottom outlet supported
FAQs
Do you have a question regarding this product?
Call us directly 0131 538 4343 or click the button to ask us a question.
Ask a Question
Be the first to ask a question about this product.
REVIEWS
Have you purchased this product from Shower Doctor?
Why not leave a review here and help other buyers that are looking.
Be the first to write a review about this product.