Mira

Mira Element SS BIV Built-in Thermostatic Mixer with Shower Kit (Chrome)

Product Code: ZMIRA-1.1656.002 Various
Our Price Sale
£314.80 inc VAT
RRP £366.05 (Saving 14%)
Guarantee
QUANTITY
Item added to basket. Click here to view basket.
Please select a size from above to proceed.
Home delivery from Mon 8th April
ALL OUR PRODUCTS HAVE A PRICE PROMISE
OVERVIEW VIEW DESCRIPTION
Bringing both thermostatic temperature and flow control onto one simple to use dial, the Mira Element makes showering beautifully simple – and stunningly affordable.

  • Thermostatic temperatures stability keeps showering safe for all the family
  • One single control for flow and temperature creates a clean, minimal look
  • Choose BIV or EV models for a 4-spray showerhead with a partial rub-clean rubbing nozzles, or a BIR single spray showerhead
  • Can be fitted to falling, rising and rear water supplies
  • Approved to TMV2 standards, which means you know its thermostatic control is the very highest quality
  • Clean chrome finish

You might also be interested in

(7)

Universal Superstrong Shower Hose 150cm - 52820

R.R.P £16.80
Our Price
£10.96
Sale
In Stock
(8)

Euroshowers C-Jet Wras Approved Chrome - 56620

R.R.P £16.80
Our Price
£13.80
Sale
In Stock

Product Description

Bringing both thermostatic temperature and flow control onto one simple to use dial, the Mira Element makes showering beautifully simple – and stunningly affordable.

  • Thermostatic temperatures stability keeps showering safe for all the family
  • One single control for flow and temperature creates a clean, minimal look
  • Choose BIV or EV models for a 4-spray showerhead with a partial rub-clean rubbing nozzles, or a BIR single spray showerhead
  • Can be fitted to falling, rising and rear water supplies
  • Approved to TMV2 standards, which means you know its thermostatic control is the very highest quality
  • Clean chrome finish
  • GTIN: 5013181049299

Product Specification

  • Colour: Chrome
  • Depth: 56mm
  • Fitment Style: Concealed
  • Guarantee: 5 Years
  • Height: 183mm
  • Inlet Connection: 15mm Compression
  • Minimum Running Pressure: 0.1 Bar
  • Plumbing System: Low Pressure
  • Temperature Control: Thermostatic
  • Water Entry: Back
  • Width: 183mm

Technical Information
Principle of Operation

This full thermostatic shower control turns flow on/off and mixes hot and cold water to the desired showering temperature. It automatically compensates for variation in both the temperature and pressure of the inlet water supplies to maintain the blend temperature. If either supply fails the shower control will automatically shut down to prevent scalding.

Limitations of Use
Mira Element should not be used for applications where an outlet flow control forms part of the shower fitting.

Temperature
Maximum inlet hot water temperature: 85°C (BS6700 recommends a maximum of 65°C).
Minimum temperature differential between blend and hot: 12°C
Hot and cold supplies to be a nominally equal pressure
Maximum pressure imbalance: 5:1

Pressure (inlet supplies)
Minimum pressure: 0.1 bar
Maximum maintained pressure: 5.0 bar
Maximum static pressure: 10.0 bar

Performance
The specification performance outlined below is achieved with inlet water supply temperatures of 15°C cold and 65°C hot, and nominally equal inlet supply pressures:
Temperature selection range: full cold to preset maximum (factory set 43°C).
Thermostatic temperature control is achieved in the range 35°C – 45°C
The blended water temperature is maintained within 2°C with a 10°C change in either the hot or cold supply temperatures.
Shutdown to seepage in typically two seconds if either the hot or cold supply fails provided the hot supply is more than 12°C above the blend temperature.
The blended water is maintained within a 2°C range when the pressure of either supply is reduced by 50%.
For high pressure supplies a slow regulator should be fitted to the outlet.

Guarantee

Guaranteed for five years from date of purchase against faulty materials or workmanship.

Application

Mira Element is suitable for installation as part of the following plumbing systems:
Gravity fed
Fully modulating instantaneous gas heated
Mains pressurised (heated from a thermal store)
Unvented mains pressure
Pumped

When the Mira Element is used with mains pressure appliances at pressures above 5.0 bar maintained, a drop-tight pressure reducing valve must be installed to maintain performance.

Installation

The plumbing installation must comply with the requirements of UK Water Regulations/Bylaws (Scotland), Building Regulations or any particular regulations and practices specified by the local water company or water undertakers.
The installation should be carried out by a plumber or contractor who is registered or is a member of an association.
Protect the product from damage when making soldered connections. Some fluxes may cause damage to plastic components.

Mira Element Built-in (shower control only)

Inlet connections: 15mm compression
Outlet connection: 15mm compression
Mounting bracket for thin panel thickness between 4 – 21mm, or sold, dry lined or stud partitioned walls.
Rising and falling inlet supplies go directly into the shower control without the need for additional elbows.
Right-angle hose connector
Built-in shroud for product protection during plastering
Reverse inlet connections supported
Alternative top or bottom outlet supported

FAQs (3)

Do you have a question regarding this product?
Call us directly 0131 538 4343 or click the button to ask us a question.


Ask a Question

REVIEWS

Have you purchased this product from Shower Doctor?
Why not leave a review here and help other buyers that are looking.

Submit a review for this product

Be the first to write a review about this product.

Delivery

Estimated Delivery: Stocked items usually within 1-3 days, depending on selected delivery option.

Delivery Options: Various delivery options are available including "Next Day" home delivery and Click & Collect from local shops

Order by 3pm for Next Day Delivery option

Returns

If you would like to return any items please send them to:
 
Returns Department
The Shower Doctor Ltd
Unit 4b, Bankhead Crossway South
Edinburgh
EH11 4EX

When arranging the return yourself, please take a note of any tracking or parcel reference numbers that are provided.

Alternatively, if you would like to use our Royal Mail tracked returns service just follow this link: http://www.royalmail.com/track-my-return/create/5092

The cost for using this service is £3.99 which will be deducted from any refund entitlement.

Please disclose the reason for returning the item along with details of your order number and or account reference.