mira elite going hot / cold
The things to check first are.
1 Check that the valve on the line to the shower is fully open.
2 Check that the inlet filter is clean and clear
If the valve is not fully open then there may not be enough water
getting to your shower to cool it properly the overheat safety device will turn
the power off until it cools Then it all starts again
Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally
If all of these are OK then you probably need a new flow valve assembly.
http://www.showerdoc.com/shower-spares/mira/MIRA-1563-507-Mira-Flow-Valve-Assembly-1563-507
Answered 13 years ago by The Shower Doctor
View Spares and Order Parts:
Mira Elite ST Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Mira Elite ST - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Pumped Electric Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Pumped Electric
For any other support request please get in touch.