Mira Elite ST cannot adjust

OK have Mira elite st when I turn off the shower the water keeps coming for a while don't seem to be able to control the temperature? have it set to high, 3 to 4 digits above red digits but if I turn it to cold still stays at same temperature area water "soft.
Asked 12 years ago by Anonymous

Make sure that the valve on the line to the shower is fully open, then check the inlet filter is clean and the shower head is also clear, if all these ate OK then you are going to need a new flow valve.

http://www.showerdoc.com/shower-spares/mira/MIRA-1563-507-Mira-Flow-Valve-Assembly-1563-507

 

 

Answered 12 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Elite ST - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Pumped Electric Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Pumped Electric

For any other support request please get in touch.