This question is regarding Mira Elite ST - Shower Spares

No hot water

put new flow valve in as water didn't switch off. Now that's OK but no HOT water
Asked 12 years ago by Sue
Check that the levers in the flow valve are actuating both microswitches when shower is on and full power is selected.
Check the thermal switch on top of the heating can for continuity , if open circuit a replacement is required , it can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/mira/MIRA-416-41-Mira-Thermal-Switch---416-41

Answered 12 years ago by Anonymous

be careful - make sure power is off before checking or removing cover or parts .

check thermal cut off switch -there should be continuity between both sides of thermal cut off switch-if that's okay check element -again if the elements are okay you will have continuity between live and neutral legs

Answered 10 years ago by David Kemmy

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Elite ST - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Pumped Electric Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Pumped Electric

For any other support request please get in touch.