Mira
REVIEWS

Mira Minilite B Built-in Thermostatic Mixer Shower, Valve Only (Chrome) - 1.1663.013

Product Code: ZMIRA-1.1663.013

Product Discontinued
This product has been discontinued and is no longer available.

We have sold our remaining stock and there are no direct replacements, however if you wish to discuss your options, please do not hesitate to contact us

You might also be interested in

(7)

Universal Superstrong Shower Hose 150cm - 52820

R.R.P £16.80
Our Price
£10.96
Sale
In Stock
(8)

Euroshowers C-Jet Wras Approved Chrome - 56620

R.R.P £16.80
Our Price
£13.80
Sale
In Stock

Product Description

Mini size, maximum performance. Beautifully compact, but with a powerful punch, the thermostatic technology and simple to use single controls on the Mira Minilite range make it idea for all the family.

  • Thermostatic temperature stability keeps showering safe for all the family
  • One single control for flow and temperature creates a clean, minimal look
  • Can be fitted to falling, rising and rear entry supplies
  • Approved to TMV2 standards, which means you know its thermostatic control is the very highest quality

Product Specification

  • Colour: Chrome
  • Depth: 39mm
  • Fitment Style: Concealed
  • Flow Limited: 12 litre/min
  • Guarantee: 3 Years
  • Height: 183mm
  • Inlet Connection: 15mm Compression
  • Minimum Running Pressure: 0.1 Bar
  • Plumbing System: Low Pressure
  • Temperature Control: Thermostatic
  • Water Entry: Back
  • Width: 183mm


Technical information
Limitations of Use

Mira Minilite should not be used for applications where an outlet flow control forms part of the shower fitting.

Application
Mira Minilite is suitable for installations as part of the following plumbing systems:
Gravity fed
Fully modulating instantaneous gas heated
Mains pressurised (heated from a thermal store).
Unvented mains pressure
Pumped
When the Mira Minilite is used with mains pressure appliances at pressures above 5 bar maintained, a drop-tight pressure reducing valve must be installed to maintain performance.

Supply Conditions

Recommended hot inlet supply temperature 55°C – 65°C
Maximum hot temperature: 85°C (maximum recommended is 65°C ref BS6700)
Recommended cold water temperature 5°C – 25°C
Minimum cold temperature 1°C
Hot and cold supplies to be at a nominally equal pressure.
Minimum maintained pressure:  0.1 bar
Maximum maintained pressure: 5.0 bar
Maximum static pressure: 10.0 bar

Performance

The specification performance outlined below is achieved with inlet water supply temperatures of 15°C cold and 65°C hot, the mixed temperature in the range 35°C – 45°C and nominally equal inlet supply pressures.
Temperatures selection range: Full cold to preset maximum (factory set at 43°C) but can be easily reset depending on the site conditions.
The blended water temperature is typically within 2°C with a 10°C change in either hot or cold supply temperatures.
Shutdown to seepage in typically two seconds if either the hot or cold supply fails, provided the hot supply is more than 12°C above the blend temperature.
The blended water is maintained within a 2°C range, when the pressure of either supply is reduce by 50% (0.5 bar maintained).
For high pressure supplies, a 12l/min flow regulator (supplies) should be fitted to the outlet.

Maintenance
This product is designed to be maintenance free apart from inlet filters which should be cleaned regularly.
Maintenance should be carried out in accordance with the information in the Installation and User Guide, supplied with each product. This guide should be retained by the user for future reference.
Conveniently situated isolating valves must be fitted in the supply pipework to allow complete maintenance of the product.

Guarantee
Guarantee for three years from date of purchase against faulty materials or workmanship.

Installation
The plumbing installation must comply with requirements of UK Water Regulations/Bylaws (Scotland), Building Regulations or any particular regulations and practices specified by the local water company or water undertaker.
The installation should be carried out by a plumber or contractor who is registered as a member of an association.
Protect the product from damage when soldered connections. Some fluxes may cause damage to plastic components.

Mira Minilite Built-in (shower control only)

Inlet connections: 15mm compression
Outlet connection: 15mm
Mounting bracket: for easy rear mounting
Rising and falling inlet supplies go directly into the shower control without the need for additional elbows.
Right-angle hose connector
Easily accessible filters
Reversed inlet connections supported
Alternative top or bottom outlet supported

FAQs

Do you have a question regarding this product?
Call us directly 0131 538 4343 or click the button to ask us a question.


Ask a Question

Be the first to ask a question about this product.

REVIEWS (1)

Have you purchased this product from Shower Doctor?
Why not leave a review here and help other buyers that are looking.

Submit a review for this product
MIRA MINILITE B by Mr A Miles