This question is regarding Mira Sport Moment Push Button Switch - 416.53

mira sport 10.8

Alasdair



The off button on this shower has stopped switching off the shower, has to be done at the cable. Otherwise it is fine. Is a straight repacement likely to fix it and if so is is a simple push fit as the picture seems to suggest?



Regards

Mark
Asked 13 years ago by Anonymous
Before orering the switch check the existing one for signs of water damage as a leak from the flow valve is the most usual cause of failure of the switch, if there is evidence of a leak then a new flow valve c/w switch is required, Either can be ordered online via the link below.
The switch is a simple push fit but the hard part is getting the old one out, it has to be levered out using 2 small flat bladed screwdrivers.

http://www.showerdoc.com/shower-spares/mira/MIRA-PARENT-15-Mira-Sport-10-8kW---post-1998

Answered 13 years ago by Anonymous

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport Moment Push Button Switch - 416.53

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Other Spares Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Other Spares

For any other support request please get in touch.