Mira Silver EV Exposed Thermostatic Mixer with Shower Kit (Chrome)
- Thermostatic temperature stability keeps showering safe for all the family
- A maximum temperature stop enhances safety
- One single control for flow and temperature creates a clean, minimal look
- Choose BIV or EV models for a 4-spray showerhead with partial rub-clean nozzles, or a BIR single spray showerhead
- Can be fitted falling, rising and rear water supplies
- Approved to TMV2 standards, which means you know its thermostatic control is the very highest quality
- Comes with a clean chrome finish
You might also be interested in
Mouldcure Pink and Black Mould Removal Spray (1 litre bottle) - HC0028/1-1/SHO
Product Description
- Thermostatic temperature stability keeps showering safe for all the family
- A maximum temperature stop enhances safety
- One single control for flow and temperature creates a clean, minimal look
- Choose BIV or EV models for a 4-spray showerhead with partial rub-clean nozzles, or a BIR single spray showerhead
- Can be fitted falling, rising and rear water supplies
- Approved to TMV2 standards, which means you know its thermostatic control is the very highest quality
- Comes with a clean chrome finish
Product Specification
- Colour: Chrome
- Depth: 137mm
- Fitment Style: Exposed
- Guarantee: 5 Years
- Height: 105mm
- Inlet Connection: 15mm Compression
- Minimum Running Pressure: 0.1 Bar
- Plumbing System: Low Pressure
- Temperature Control: Thermostatic
- Water Entry: Back
- Width: 173mm
Principle of Operation
This fully thermostatic shower control turns flow on/off and mixes hot and cold water to the desired showering temperature. It automatically compensates for variation in both the temperature and pressure of the inlet water supplies to maintain the blend temperature. If either supply fails the shower control will automatically shut down to prevent scalding.
Limitations of Use
Mira Silver should not be used for applications where an outlet flow control forms part of the showering fitting.
Temperature
Maximum inlet hot water temperature: 85°C (BS6700 recommends a maximum of 65°C)
Minimum temperature differential between blend and hot: 12°C
Hot and cold supplies to be a nominally equal pressure
Pressure (inlet supplies)
Minimum pressure: 0.1 bar
Maximum maintained pressure: 5.0 bar
Maximum static pressure: 10 bar
Performance
The specification performance outlined below is achieve with inlet water temperatures of 15°C cold and 65°C hot, and nominally equal inlet supply pressures.
Temperature selection range: full cold to preset maximum (factory set is 43°C)
Thermostatic temperature control is achieved in the range 35°C – 45°C.
The blended water temperature is maintained within 2°C with a 10°C change in either the hot or cold supply temperatures.
Shutdown to seepage in typically two seconds if either the hot or cold supply fails provided the hot supply is more than12°C above the blend temperature.
The blended water is maintained within 2°C range when the pressure of either supply is reduced by 50%.
For high pressure supplies a flow regulator should be fitted to the outlet.
Guarantee
Guaranteed for five years from the date of purchase against faulty materials or workmanship.
Application
Mira Silver is suitable for installation as part of the following plumbing systems:
Gravity fed
Fully modulating instantaneous gas heated
Mains pressurised (heated from a thermal store)
Unvented mains pressure
Pumped
When the Mira Silver is used with mains pressure appliances at pressures above 5.0 bar maintained, a drop-tight pressure reducing valve must be installed to maintain performance.
Installation
The plumbing installation must comply with requirements of UK Water Regulations/Bylaws (Scotland), Building Regulations or any particular regulations and water practices specified regulations and practices specified by the local water company or water undertakers.
The installation should be carried out by a plumber or a contractor who is registered or is a member of an association.
Protect the product from damage when making soldered connections. Some fluxes may cause damage to plastic components.
Mira Silver Surface-mounted (shower control only)
Inlet elbows accept falling, rising or rear entry supplies.
Inlet connections: 15mm compression
Outlet connections: ½” BSP flat face.
Reversed inlet supplies supported
Alternative top or bottom outlet supported
FAQs (1)
Do you have a question regarding this product?
Call us directly 0131 538 4343 or click the button to ask us a question.
Ask a Question
REVIEWS
Have you purchased this product from Shower Doctor?
Why not leave a review here and help other buyers that are looking.
Be the first to write a review about this product.
Delivery
Estimated Delivery: Stocked items usually within 1-3 days, depending on selected delivery option.
Delivery Options: Various delivery options are available including "Next Day" home delivery and Click & Collect from local shops
Order by 3pm for Next Day Delivery option
Returns
If you would like to return any items please send them to:
Returns Department
The Shower Doctor Ltd
Unit 4b, Bankhead Crossway South
Edinburgh
EH11 4EX
When arranging the return yourself, please take a note of any tracking or parcel reference numbers that are provided.
Alternatively, if you would like to use our Royal Mail tracked returns service just follow this link: http://www.royalmail.com/track-my-return/create/5092
The cost for using this service is £3.99 which will be deducted from any refund entitlement.
Please disclose the reason for returning the item along with details of your order number and or account reference.