flow light on and no heat

when i switch on the shower the low flow light switches on and off and the shower makes a banging soundand there is only cold water. If you bang the outside of the shower cover the light goes off and then the hat water comes on.What could be the fault?
Asked 11 years ago by Anonymous
Check that you do not have a loose connection in the shower.

Makesure that the shower head is clean and clear, that the hose isn’t kinked (thiscan happen just behind the hand set where it is difficult to see) also check theinside of the hose although it can look OK on the outside it could havecollapsed internally

The other possibility is a faulty flow/stabilizer valvenot allowing the correct amount of water into the shower.

A rough check is to remove theshower head turn temperature control to fully hot the water coming out of thehose should be a bit more than a dribble then turn to fully cold and it shouldbe coming out at full flow.

Ifthere is not much difference between the two then you could have a faulty flowvalve.

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport Max - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.