Low flow light coming on

Hi,

My Mira sport max tripped the rcd recently after which the water coming out was only slightly warm. Did some checks with you and it appeared to be the heater tank so I replaced it but now when I turn it on it almost immediately the low flow light comes on and the water is cold. I ve checked to ensure the supply valve is fully open and also that there is a good difference in flow rate between it being on cold them max.

I ve checked the thermal cut out and there is continuity across the terminals of it.

I m now stuck for ideas - any suggestions
Asked 11 years ago by Mr John
First I would check the connections from the can to the PCB are correct, and if so it maybe the inlet filter is blocked.

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport Max - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.