Mira Sport Max - low flow and intermittent overheat
Over the last couple of months, I've noticed the shower has had slightly lower flow going through it. If there are other flow demands (e.g. Toilet flushing) then low flow light now comes on until other demands finish.
During showering, the overheat light comes on intermittently, staying on for around 2 seconds followed by the water going cold. After this, the water warms up for say 10 seconds before repeating.
The things to check first are.
1 That the main valve coming into your house is fully open.
2 Then check that the valve on the line to the shower is fully open.
If these valves are not fully open then there may not be enough water getting to your shower to open/close the safety device that allows the power through to the elements.
Also check that your shower is connected to the water mains and you have a minimum of 1bar water pressure, although your pressure may normally be good it can often drop dramatically first thing in the morning when everyone is showering.
Answered 12 years ago by Anonymous
View Spares and Order Parts:
Mira Sport Max Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport Max - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers
For any other support request please get in touch.