Mira Sport problems...

Our Mira Sport (9.5Kw I think) is doing odd things, none of which quite agree with the other diagnosis on the site, which leads me to think we may have more than one component part failing?



1. Sometimes when you switch the shower on it shuts down after a few seconds. It will then re-start normally and is good for the duration of your shower.



2. It has started taking an age to purge after switching off and it doesn't stop delivering water until it is stone cold. In the past it purged in a few seconds and you didn't have to dive out of the cubicle to avoid getting a cold final rinse!



3. A couple of times now I have gone to use it immediately after it has been switched off by who went before me and it will then NOT deliver water at a temperature much more than luke-warm even with the temp control right round into the red and the water flow down to a dribble - normally with the control that far over it spits near boiling water and the overheat light comes on very quickly. This has happened twice now and both times the unit functioned perfectly again the following day.
Asked 9 years ago by Anonymous

www.showerdoc.com/mira-sport-max-shower-spares

If this is your shower , then you may have a faulty PCB that is causing these problems.

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport Max - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.