This question is regarding Mira Sport Max - Shower Spares

overheat light

I replaced the TCO recently as it was faulty. The overheat light is now on both the high and medium settings but not the low. The shower is also taking a very long time to switch off, probably double the time it used to take. Is this likely to be the TCO again or is there something else I should check?
Asked 11 years ago by Kirsten
You are not getting enough water through the shower, so check the inlet filter, inlet valve is fully on,  head and hose are clear. If so, then,

forgetting about the temperature, turn the showerfrom fully hot to fully cold. At fully hot you should have not much more than adribble coming from the hose, and on fully cold you should have a good strongflow. If you do not have this difference then you may have a faultyflow valve.

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport Max - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.