This question is regarding Mira Sport Max - Shower Spares

overheat light

Hi our 10.8 sport max cycles from hot to cold , the overheat light comes on cold water for 20 secs then heats for min then overheat cold again etc etc . Checked filter, flow on cold good on hot decent dribble . Thought was it flow valve but seems ok in difference from cold and hot so thought is it the thermal switch ?

Ideas ?

Cheers

Martin
Asked 9 years ago by Martin

You will have to check that there is 1.5 bar dynamic pressure and a flow rate of a minimum of 6 ltrs per minute for the shower to work properly.

If you have this, you may have a faulty PCB.

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport Max - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.