Coram Shower Pods is a leading specialist in the design and manufacturer of high quality, robust and completely watertight showering cubicles. Coram's innovative design provides the fastest and easiest means of creating a completely watertight shower installation. No tiling to worry about - these Pods once fitted are completely watertight as the tray and wall up-stands come moulded together.
Coram Showerpods have exceeded all requirements for life time cost and installation in a number of environments ranging from leading UK house builders, educational establishments, commercial facilities and even the Military.
All the showering and thermostatic valve parts come factory fitted so it’s just a case of connecting the waste and water supplies. Coram also offer a lifetime watertight guarantee with all their Shower Pods.
Included with each Shower Pod is a free thermostatic mixer bar and riser rail.
|
Thermostatic Mixer Valve
|
Riser Rail
|
Fitting the Shower Pod
 |
The walls and base of the shower pod are supplied in two sturdy cartons, which can easily be manoeuvred on site up stairwells and through doorways to the exact location.
The pod is robustly constructed from GRP (glass reinforced polymer) and can be fitted by one man in the simple stages shown below.
|
Position and fit the fixing batons to the wall.
Locate, level and fix the base.
|
Slot the side panels to the base and fix to the back wall batons, using the spacer provided to ensure that the correct gap is left for the back panel.
|
The back panel can then be slotted into position and secured with a single screw.
The front edges of the side panels can then be secured to the side wall batons and the fixing screws will be concealed by the door frame.
|
|
The Shower Doors
 |
Coram’s shower doors have been designed to be faster and easier to fit than any other on the market, which is why Coram have become a leading provider of shower enclosures to trade installers. Each shower door is supplied fully assembled, so that on site all that is required is to fit the handle and then install it using the wall channels as shown below.
|
When fitting the shower door the first thing is to position the wall channels and drill the screw holes.
|
The door is finally secured by drilling through the wall channels into the door frame and fixing with screws.
|
The wall channels are then slotted onto the door and screw fixed to the wall.
|
|
Fitting the mixer
 |
A special mounting plate is factory fitted to the pod wall, which means that on site you simply need to connect the mixer to the hot and cold feeds with the valve nuts. On the reverse of the mounting plate flexible pipes hang down the back of the unit and these can be accessed via the removable panel at the front of the base to allow easy attachment to the piped supplies with the push-fit connectors provided. The rest of the shower fittings are then simply screw fixed.
The built-in valve is factory fitted, which means that on site you simply need to connect the mixer to the hot and cold feeds on the reverse of the valve and connect the shower hose via the bulkhead. The rest of the shower fittings are then simply screw fixed.
For special commercial application an anti-ligature fixed spray head is also available.
|
A unique mounting plate is factory fitted to the pod wall.
|
The mixer simply connects to the hot and cold feeds with the valve nuts.
|
Flexible pipes hang down the back of the unit.
|
|
The pipes are accessed via the removable panel at the front of the base.
|
Allowing easy attachment to the piped supplies with the push-fit connectors provided.
|
|
|
Delivery for these products usually takes around two weeks. On confirmation of order, we will be able to confirm a delivery date. When going through Checkout, please supply a current telephone number.