Universal single pumps can be used in pairs to boost vented
systems to pump hot and cold water supplies independently, or as a
single pump to boost a water supply as required.
- Ideal for boosting hot water service to a common mixer where
the cold supply is mains fed.
- Ideal for boosting hot and cold supplies separately.
- Suitable for increasing water pressure to a combi boiler via a
break tank.
Technical Specification
| The Pump |
| Inlet strainer |
|
| Stuart hard face mechanical seal |
|
| Flow switch sensitivity |
approx. 0.6 l/min |
| Pressure switch |
|
| Max. inlet head |
12 metres |
| Plumbing connection |
G ¾ " male |
| Flexible hose |
G ¾ " female x 22 mm push-in c/w isolating valves x 305 mm
long |
| Anti vibration feet |
|
| WRAS approved |
|
| The Motor |
| Power Supply |
230/1/50 |
| Enclosure rating |
IPX4 |
| Motor |
Induction type, permanent capacitor, auto resetting protective
thermotrip |
| Power consumption |
440 Watts |
| Full load |
2.5 Amps |
| Fuse rating |
5 Amps |
| Pre wired |
|
| Rating |
Continuous (S1) @ 9 l/min and above |
| Gross weight (packed) |
7.6 Kg |
| 2 Year Guarantee |
Can be extended free to 3 years -United Kingdom only |
| Part Number: |
46414 (United Kingdom specification only) |