Standard twin pumps are designed for installation into vented systems to pump both the hot and cold water supply - boosting both equally. They can be used to:
- Boost hot and cold water services to the complete home, bathroom, kitchen or cloakroom.
- Boost hot and cold water supplies to a high performance shower system.
Technical Specification
| The Pump |
| Hot & cold inlet strainers |
|
| Stuart hard face mechanical seal |
|
| Flow switch sensitivity |
approx. 0.6 l/min |
| Max. inlet head |
14 metres |
| Plumbing connection |
G ¾ " male |
| Flexible hose |
G ¾ " female x 22 mm push-in c/w isolating valves x 305 mm long |
| Anti vibration feet |
|
| WRAS approved |
|
| The Motor |
| Power Supply |
230/1/50 |
| Enclosure rating |
IPX4 |
| Motor |
Induction type, permanent capacitor, auto resetting protective thermotrip |
| Power consumption |
961 Watts |
| Full load |
4.9 Amps |
| Fuse rating |
13 Amps |
| Pre wired |
|
| Rating |
Continuous (S1) @ 9 l/min and above |
| Gross weight (packed) |
10.6 Kg |
| 2 Year Guarantee |
Can be extended free to 3 years -United Kingdom only |