A: It may be a faulty element in the heating tank (there are two, three in most 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.
If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably a micro switch.
If you don’t have a multimeter we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.
Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries
(so you know if they are dud or not) and lots of other jobs, in short they are well worth the £10.
http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester
The replacement is fairly straight forward.
Turn of the water and power you then have to dismantle most of the inside of the shower to get enough space to slip the old part out and the new part in.
This sounds more difficult than it actually is, however you do have to be methodical noting where screws/nuts etc. come from and what goes where and it is always a good idea to take photos as you go because you can refer to them when you are rebuilding.
Answered 507 days ago | The Doc