A: The replacement hose shouldn’t have caused any problem unless it has collapsed internally. Just have a look down it and see.
However it is most likely the solenoid valve.
It may be your solenoid valve, you can check it if you have a multi meter, you should have a reading of at least k3.5 ohms, across the two terminals any less and you need a new valve. (Check the valve in the failed state.) (When it is not working!)
If there is power getting to the solenoid and it is not operating then there is a good chance that you have a faulty solenoid.
If you don’t have a multimeter we sell them with a guide on how to use them for checking and testing the various parts of your shower.
Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses and letting you know much power you have left in batteries
(So you will know if they are good or not) and lots of other jobs, in short they are well worth a few pounds
http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester
Answered 374 days ago | The doc