Triton Alicante

A: 

Triton should be able to email you one.

http://www.tritonshowers.co.uk/about-triton.aspx

 

A: 

It may be a faulty element in the heating tank (there are two, three in most 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.

If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably a micro switch.

 

If you don’t have a multimeter  we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.

 

Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries

(so you know if they are dud or not)  and lots of other jobs, in short they are well  worth the £10.

 

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

A: 

 

If there is some heat it may be a faulty element in the heating tank (there are two, three in most 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.

If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably a micro switch.

 

If you don’t have a multimeter  we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.

 

Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries

(so you know if they are dud or not)  and lots of other jobs, in short they are well  worth the £10.

 

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

If the elements are OK then you may have a faulty outlet TCO

The outlet Thermal Cut Out this is a black disk with two wires going to it and it is mounted on the out let pipe  (The bit between the heating tank and the hose)

Examine the connections closely if you see any discoloration / signs of overheating then the TCO needs replaced.   

 

A: 

It may be a faulty element in the heating tank (there are two, three in most 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.

If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably a micro switch.

 

If you don’t have a multimeter  we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.

 

Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries

(so you know if they are dud or not)  and lots of other jobs, in short they are well  worth the £10.

 

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

 

Or you could have a faulty outlet TCO

 

The outlet Thermal Cut Out this is a black disk with two wires going to it and it is mounted on the out let pipe  (The bit between the heating tank and the hose)

Examine the connections closely if you see any discoloration / signs of overheating then the TCO needs replaced.   

 

 

A: With the exception of the front cover this is the same unit.

http://www.showerdoc.com/shower-spares/triton/TRITO-PARENT-12-Triton-T80si

A: Check that showerb hose is not kinked or infernally collapsed and shower head is clear.
Check that water mains stopcock and ant isolation valve in the supply to the shower are fully open.
Check gauze filter in the inlet to the solenoid valve is clear.
Check ther has not been a reduction in mains water supply pressure or flow.
If all above are ok then it is likely to be a faulty stabiliser valve which can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/triton/TRITO-PARENT-39-Triton-Alicante

A: This is definitely the solenoid valve at fault, replacement can be ordered online by clicking on the link below. It is a pretty simple job to change it.

http://www.showerdoc.com/shower-spares/triton/TRITO-83300450-Solenoid-valve-assembly

A: 

It may be your solenoid valve, you can check it if you have a multi meter, you should have a reading of at least k3.5 ohms, across the two terminals any less and you need a new valve. (Check the valve in the failed state.) (When it is not working!)

If there is power getting to the solenoid and it is not operating then there is a good chance that you have a faulty solenoid.

If you don’t have a multimeter we sell them with a guide on how to use them for checking and testing the various parts of your shower.

Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses and letting you know much power you have left in batteries

(So you will know if they are good or not) and lots of other jobs, in short they are well worth a few pounds

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester