luke warm water.

only getting luke warm water with dial on high, cold water with dial on low.pressure changes when dial is adjusted between 1 and 10. mains pressure good. Continuity on both elements and on the tco.what else could be wrong ?...need to eliminate other components. thanks.
Asked 9 years ago by Anonymous

Sounds like an element, the elements need to be checked for resistance not continuity see below.

It may be a faulty element in the heating tank (there are two, three in most 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.

If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably a micro switch.

http://www.youtube.com/watch?v=wzPt1hsfVq4

If you don’t have a multimeter  we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.

Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries

(so you know if they are dud or not)  and lots of other jobs, in short they are well  worth the £10.

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester


Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T300si Remote - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.