This question is regarding Triton T90si Pumped - Shower Spares

triton t90si

i have the above shower and it was not heating the water .i checked the elements with a multimeter and they have 11 and 14 ohms .i know the tco is faulty as there is not continuity across it.i noticed one of the pressure mircoswiches were not fully releasing so i pressed them in a few times . now i have no working shower? could it be as easy as one of these swiches not working.i would appreciate if you can get back to me as soon as possible

best regards patrick
Asked 9 years ago by Anonymous

I think you may have a faulty Thermal Cut Out

A faulty TCO will have no continuity across the two terminals (The black thing on top of the heating tank)

Therefore a good TCO will have power at both connections and a faulty TCO will have power at only one.

(The function of the TCO is, if the water over heats it cuts the power off to the elements)

See Video.

http://www.youtube.com/user/showerdoc#p/u/2/_zi8JbEMYMs

 

Answered 9 years ago by Anonymous

Hi I have a T90si pumped shower, works well but recently after use a short while later it will trip the electricity

may i ask as to what you may think it will be that dose this, and what part if necessary needs replacing

Kind Regards

Simon

Answered 8 years ago by Simon Barker

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T90si Pumped - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Pumped Electric Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Pumped Electric

For any other support request please get in touch.