Triton T90si - Cold water only

Hi, My triton T90si works fine until I turn up the temperature dial. When I do this the flow is reduced to a trickle. Can figure out what's wrong.
Asked 8 years ago by Jack
The temperature and flow rate are always (Nearly always!! and always in your type of shower) connected.

When you turn your shower on you have a 7.5kw, 8.5kw, 9.5kw or 10.5kw element heating the water and this does not vary. The way you alter the temperature is by varying the amount of water that passes over the element, pass the water over the element slowly (a little water) and it gets very hot, pass it over quickly (a high flow rate) and it doesn’t have time to pick up much heat.

This explains why in the winter at the same setting as the summer the shower is not so hot because the temperature of the incoming water has changed.

You need to check the inlet filter , head and hose for blockages, and if these are fine then you may have a faulty , www.showerdoc.com/triton-flow-valve-assy-82100310

Answered 8 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T90si Pumped - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Pumped Electric Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Pumped Electric

For any other support request please get in touch.