This question is regarding Triton T90si Pumped - Shower Spares

Water temperature has dropped

Hi, I appreciate any help you can give. Triton T90si - water temperature has dropped and dial needs to be put at 9 or 10 (previously 3 or 4) to get warm water but then the pressure is terrible. I have checked the solenoid, tco, elements with a multimeter and all seem fine. I then noticed that when the shower was on there is no power getting to one of the elements from the micro-switch. How do I check this please?
Asked 10 years ago by Anonymous

I would normally suspect a faulty element.

 

However if there is no power getting to one of the elementsas you suggest it sounds like a faulty micro switch.

Basically if there is powergetting to the micro switch and not coming from the switch when it is supposedto be in the on position then the switch is faulty

Answered 10 years ago by The Shower Doctor

hi , when my ts90si is turned on ,have the power on number 3 and the shower on the coldest setting the temp of the water is roasting, put it onto power number 2 then you have to put tempature switch upto the max just to get warm water ? any ideas thanks

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T90si Pumped - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Pumped Electric Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Pumped Electric

For any other support request please get in touch.