Triton t90xr going hot / Cold

Our shower keeps turning hot to cold and visa versa, no matter what setting its on. We are either frozen of being scalded every few minutes. It does not stay a constant temperature? Does it sound like the heater can needs replacing or the thermal cut out?
Asked 12 years ago by Anonymous



Check that the inlet filter is clean and clear if it is not then there may not be enough water
getting to your shower to cool it properly the overheat safety device will turn
the power off until it cools Then it all starts again

Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally

Answered 12 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T90xr Pumped - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Pumped Electric Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Pumped Electric

For any other support request please get in touch.