Ultra Showers

Ultra Showers Ultra Group Thermostatic Shower Panel 3 - AP395

Product Code: ULTRA-AP395

Product Discontinued
This product has been discontinued and is no longer available.

We have sold our remaining stock and there are no known direct replacements.

If you need any further assistance, please do not hesitate to contact us.

You might also be interested in

(8)

Universal Superstrong Shower Hose 150cm - 52820

R.R.P £16.80
Our Price
£10.96
Sale
In Stock
(8)

Euroshowers C-Jet Wras Approved Chrome - 56620

R.R.P £16.80
Our Price
£13.80
Sale
In Stock

Product Description

AP395 THERMOSTATIC SHOWER PANEL 3

Product Specification

Fixing Instructions

Refer to the technical diagram to choose the proper location for your shower column. You can adjust the column's vertical position based on the person's height. (Measurements given in the technical diagram are based on the average human height. 68 5/7").

  1. Choose the proper location for your column and mark the drill holes (1). Drill the holes (1) on the distance 30mm from each other.
  2. Insert Wall anchors (2) inside the holes.
  3. Tighten the screws (7) to the wall with stainless steel washers (6) for fixing the support covers (3).
  4. Connect the hand shower (14) to the flexible shower hose (12) placing the rubber washer (13) in the fastening nut (25). NOTE: do not forget to use the rubber washer (13) and (18) to prevent leakage on the connection. Flexible hose end with a nut (17) should be attached to the column (23). Put the hose (12) on the shower holder (26). Insert the soap dish (15) on the holder (16).
  5. Connect the joint (9) on the shower head (8) to the fastening nut (10) of pipe. Insert the joint (9) to the hole of the column body (24), and secure them by screw (11).
  6. Connect the stainless steel braids (19) to hot and cold water outlets (21) (supplied by your plumber) accordingly after placing the mesh gaskets (20) in the nuts of the braids (19).
  7. Hold up the column body (24), and insert the supports (22) inside the covers (3). Tool the two sides of the covers (3) by screws (4), and then fix them.

FAQs (1)

Do you have a question regarding this product?
Call us directly 0131 538 4343 or click the button to ask us a question.


Ask a Question

REVIEWS

Have you purchased this product from Shower Doctor?
Why not leave a review here and help other buyers that are looking.

Submit a review for this product

Be the first to write a review about this product.