This question is regarding Aqualisa Aquastream - Thermostatic (post 2003) - Shower Spares

Pump only kicks on high power setting

When I turn the show onto the low setting water comes out but the pump does not kick in. If I then put onto high power the pump kicks in. Hot or cold makes no difference.



The fault seems intermittent as yesterday the pump did not kick in on either low or high power.



Asked 10 years ago by Anonymous
http://www.showerdoc.com/aqualisa-dual-speed-loom-assembly-241302


You may have a faulty loom. This is usually caused by a leaking cartridge, so I would check that as well.

Answered 10 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Aqualisa Aquastream - Thermostatic (post 2003) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Aqualisa Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Aqualisa Power Showers

For any other support request please get in touch.