This question is regarding Aqualisa Aquastyle Electric Shower - Shower Spares

Very low flow and exchanger is on even when set to cold setting

Hi

It appears that my exchanger is on fully even if I have the setting on cold. It has very low flow and a boiling sound eventually resulting in steam from the unit.

This has happened suddenly and was all ok half an hour before it happened.

Even if I turn the isolation switch off at the wall, the flow is very low as if the shower is stuck at maximum temp setting.

What do you think it is and how can I replace it please?

Thanks

Asked 9 years ago by Anonymous

You have a micro switch that is stuck in the on position and this has burnt out one of the elements.

So you are going to need a new heat exchanger a couple of micro switches and possibly a new pressure switch.

Looking at the prices it is time for a new shower!

The Triton Fast fit is probably the easiest change over (make sure you select one with the same output as your existing shower.)

http://www.showerdoc.com/triton-t80z-fast-fit-8-5kw-electric-shower-white-chrome

http://www.showerdoc.com/triton-t80z-fast-fit-9-5kw-electric-shower-white-chrome


Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Aqualisa Aquastyle Electric Shower - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Aqualisa Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Aqualisa Electric Showers

For any other support request please get in touch.