This question is regarding Aqualisa Aquavalve 600 Thermostatic & 430 Manual - Shower Spares

Aqualisa 600

Hi All. Have ordered parts 07320 to replace broken ones, however broken section of screw fitting still on Body (071520). For access how do you remove Shroud? from shower assembly? my 68520.. numbers all from 600 spares diagram. Thanks
Asked 3 years ago by Ray Weston, Notts
It is held in place by a large 'O' ring so it should just pull forward, although it can be fairly difficult to start moving.

You can see the groove for the 'O' ring on the body about 15mm back from the front edge

www.showerdoc.com/aqualisa-body-plug-and-outlet-white-017520

There is an image of the rings just below the main image.

Answered 3 years ago by George Thomson

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Aqualisa Aquavalve 600 Thermostatic & 430 Manual - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Aqualisa Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Aqualisa Concealed Shower Valves

For any other support request please get in touch.