Dripping Temperature Controller

Just recently i have noticed when i turn my shower on there is a slight drip coming from behind the temperature controller. When the shower is off there is no drip at all. When the shower is turned off there is a quiet hissing sound coming from the cartridge.



When I removed the on/off knob and temperature controller the leak looked as those it was coming from behind the green coloured temperature controller. Is it possible that the "O" rings are worn and the cartridge is needing replaced?



is it possible to replace the cartridge in-situ without removing the housing?
Asked 11 years ago by Anonymous
It does sound like you have a faulty cartridge, which you can replace in situ,

remove the on/off knob should just pull forward however it can be a bit of a bu**er then remove the 4 screws that hold the temperature knob in place, remove the temperature knob and then you will see the colour of your cartridge.

If you already have the cartridge and want to carry on and replace it you will have to turn the water off to the shower.

Then remove the cartridge you will need to remove the 4 large screws at the side of the cartridge these have posidrive or ‘Torx’ T25 heads depending on there age.

Pull the cartridge forward to remove.

Before fitting the new cartridge you should replace the small ‘O’ ring at the rear of the body this is another bu**er to change……(something like a crochet hook or the sort of thing that dentists use will help)

It is not always necessary to replace this ring however if there any problems with the cartridge, the first question you will be asked is did you replace the ‘O’ ring? if the answer is no! then you will be told to phone back once it has been replaced.

When you refit the cartridge make sure that the slot, (usually on the right of the body ) the gasket and the body all line up properly then retighten the screws.

On the older versions you have to reuse the original brass screws if you have this type be careful not to over tighten the screws because the brass inserts in the body may split, on a few occasions you may find they have split when you remove the old cartridge if this happens then you will probably have to replace the body.

Refit the temperature control knob (new screws supplied) the fit the on / off knob, turn the water back on and check for leaks, if everything is OK remove clothes and have a shower!!!

Answered 11 years ago by Anonymous

View Product and Order Online:

Do you require any further help with Tap or Shower Cartridges?

Please click the following link if you would like to see other answers or ask a question regarding the Aqualisa Green High Pressure Thermostatic Cartridge with Gasket - 022803

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Aqualisa Cartridges page. Alternatively, if you're looking for any other brands you should view our full range of Cartridges.

If you would like to buy this cartridge or look others from the same brand, please view our Replacement Aqualisa Cartridges (All)

For any other support request please get in touch.