Quartz A2 dripping shower head

The shower head is constantly dripping. The unit is powered by a quartz A2 unit.

Is there anything that can be replaced to cure the dripping?
Asked 12 years ago by Anonymous

The leak is caused by the rubber seals inside the mixer unit in the processor.

 

If you are handy using a philips screwdriver you can remove the cover. (don't forget to turn the water off on the inlet pipes) Open the mixed unit by removing the two philip screws that hold the collar in place.

 

Inside there is a metal disk (this is the mixer) underneath are two washer that fit over two springs when these stick the water continues to flow.

 

Remove them by pushing them into the socket they should then pop out. Once out apply silicone grease reinsert and put everything back together

 

 

Answered 12 years ago by The Shower Doctor

In your answer to question posed, you mention removing the collar, is that the plastic that looks like a tractor tyre ? Do you have to remove all the pump from the cover ?

Answered 10 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Aqualisa Quartz Digital Processor (BLACK) - Spare Parts

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Aqualisa Other Spares Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Aqualisa Other Spares

For any other support request please get in touch.