This question is regarding Aqualisa Quartz Electric - Shower Spares

Aqualisa Quartz Electric 8.5 Very hot . No control over temperature.

When switching on my shower unit, the water temperature became very hot. There was no control over the range and the flow was slow indicating that the flow meter is probably faulty. Surely you should have a fail safe mode. i.e. temp goes to cold in the event of a failure of the flow meter. i.e. heater inhibited. Should be able to factor in a design to prevent possible scolding.
Asked 7 years ago by David
First check that the head and hose are not blocked and that the inlet valve to the shower is fully open.
These showers do have a TCO.
The function of the TCO is, if the water over heats it cuts the power off to the elements until the water cools, this can take up to 15mins
You may need a new engine if the fault continues.

Answered 7 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Aqualisa Quartz Electric - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Aqualisa Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Aqualisa Electric Showers

For any other support request please get in touch.