manual cartridge part no. 022808 discontinued

we are having to replace the above with part no. 022801 grey. is there anything we need to adjust when fitting please. Thank you Regards Jools
Asked 7 years ago by Julie
You will have to find out which cartridge you have.

Pink for a combi or multipoint and grey any system with balanced (equal) pressures.

Remove the on/off knob should just pull forward however it can be a bit of a bu**er then remove the 4 screws that hold the temperature knob in place, remove the temperature knob and then you will see the colour of your cartridge.

If you already have the cartridge and want to carry on and replace it you will have to turn the water off to the shower.

Then remove the cartridge you will need to remove the 4 large screws at the side of the cartridge these have posidrive or ‘Torx’ T25 heads depending on there age.

Pull the cartridge forward to remove.

Before fitting the new cartridge you should replace the small ‘O’ ring at the rear of the body this is another bu**er to change……(something like a crochet hook or the sort of thing that dentists use will help)

It is not always necessary to replace this ring however if there any problems with the cartridge, the first question you will be asked is did you replace the ‘O’ ring? if the answer is no! then you will be told to phone back once it has been replaced.

When you refit the cartridge make sure that the slot, (usually on the right of the body ) the gasket and the body all line up properly then retighten the screws.

On the older versions you have to reuse the original brass screws if you have this type be careful not to over tighten the screws because the brass inserts in the body may split, on a few occasions you may find they have split when you remove the old cartridge if this happens then you will probably have to replace the body.

Refit the temperature control knob (new screws supplied) the fit the on / off knob, turn the water back on and check for leaks, if everything is OK remove clothes and have a shower!!!



Part No.
AQUAL-022-801
Cartridge Thermostatic Grey LP Gravity Fed & Pumped Systems Only





Part No.
AQUAL-022-802
Cartridge Multipoint HP/ Pink Combi Boilers Only









Part No.
AQUAL-022-804
Cartridge Manual Blue

Part No.
AQUAL-022-805
Cartridge Manual White

Part No. AQUAL-022803 HP Thermo cartridge (Green)



Click on the link below, choose the manufacturer of the shower you have, scroll down the list of parts and select the part number you require.

www.showerdoc.com/shower-accessories/cartridges/aqualisa

You can then purchase the items online or call the office on 0131 443 9917 pressing option # 1 for spares.

Answered 7 years ago by Anonymous

View Product and Order Online:

Do you require any further help with Tap or Shower Cartridges?

Please click the following link if you would like to see other answers or ask a question regarding the Aqualisa Grey Gravity/Pumped Thermostatic Cartridge with Gasket - 022801

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Aqualisa Cartridges page. Alternatively, if you're looking for any other brands you should view our full range of Cartridges.

If you would like to buy this cartridge or look others from the same brand, please view our Replacement Aqualisa Cartridges (All)

For any other support request please get in touch.