This question is regarding Aquatron Sigma - Shower Spares

not much flow on hot water

I get hot water the shower is fine but the more I turn it up the more it gets cold any help please
Asked 9 years ago by Anonymous
Turn the shower temperature control from fully cold to fully hot. When you do this slowly there should be a gradual change in temperature and flow. At fully hot you should have not much more than a dribble coming from the hose, and on fully cold you should have a good strong flow. If you do not have this difference, or the flow or temperature is erratic,  then you may have a faulty flow/stabilizer valve.

Answered 9 years ago by Anonymous

I have an Aquatron over-sink water heater (effectively a shower unit). When the water control knob is turned on, water pours out of the overflow pipe and reduces the flow from the tap. Any ideas why this might be happening. Can it be rectified? Any help welcomed.



V.

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Aquatron Sigma - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Other Brands Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Other Brands Electric Showers

For any other support request please get in touch.