This question is regarding Bristan Hydropower 1500 Thermostatic Power Shower (White)

Push Fit Couplings

I was involved in the installation of our SF 1500XT about 9 years ago and remember that for some reason we had to disconnect the pipe work to the push fit couplings after installation. I recall that doing this was difficult although I don't recall why. I now wish to replace the old SF model with your replacement as the motor has failed but I wanted some advice regarding disconnecting the existing pipe work without damaging it. The unit is mounted flush to the wall with the pipes entering the back of the unit. Thanks
Asked 11 years ago by Anonymous
Once the screws holding the shower to the  wall are removed and the electrics are disconnected ( with the power switched ) there should be no problem disconnecting the pipe work. When you are re connectingg the pipe work grease the pipes first to aid connection.

Answered 11 years ago by Anonymous

View Product and Order Online:

Do you require any more information about this shower?

Please click the following link if you would like to see other answers or ask a question regarding the Bristan Hydropower 1500 Thermostatic Power Shower (White)

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Bristan Showers page. Alternatively, if you're looking for any other brands you should view our full range of Showers.

If you would like to buy this item or look at something similar, please consider one of our Replacement Bristan Power Showers

For any other support request please get in touch.