Bristan
REVIEWS

Hydropower Varispeed SI Shower Booster Pump 50

Product Code: BRIST-HY-PUMP50-VSI

Product Discontinued
This product has been discontinued and is no longer available.

We have sold our remaining stock and there are no direct replacements, however if you wish to discuss your options, please do not hesitate to contact us

You might also be interested in

(8)

Universal Superstrong Shower Hose 150cm - 52820

R.R.P £16.80
Our Price
£10.96
Sale
In Stock
(8)

Euroshowers C-Jet Wras Approved Chrome - 56620

R.R.P £16.80
Our Price
£13.80
Sale
In Stock

Product Description

  • Single impeller 1.5 bar
  • Variable speed control for flow and pressure adjustment.
  • Supplied with two flexible connectors
  • 2 year manufacturer’s guarantee

Product Specification

  • Guarantee: 2 Years
  • Head Type: Positive Head
  • Height: 190mm
  • Impeller Type: Centrifugal
  • Max Pressure Rating: 1.5 Bar
  • Pump Type: Single Impeller
  • Width: 230mm
Product  Specification     
Product Code: HY PUMP50 V 
 HY PUMP50 VSI   
Pump Type:                         Variable speed twin impeller 1.5 bar pump 
Construction:                  Acetal plastic casting     
Inlet Connections:       Flexible hose – 15mm push fit 
Outlet Connection: n:         Flexible hose – 15mm push fit  n:n:
Pump Rating:  1.5bar   
Stalled Pressure:  1.4bar   
Motor Rating:      15 Minutes on / 60 minutes off        
Additional  Information     
• Cycle rated 15 minutes on and 60 minutes off with ceramic/ carbon seals to ensure longer life and leak free operation. 
• Variable speed twin impeller pump driving both hot and cold supplies to boost shower power up to 12 times. 
• Pump rates at 1.5 bar pressure equivalent to 15 meters (50’ head). 
• Boosts performance to a single shower. 
• Pump supplied with flexible 15mm push fit inlet and outlet connections. 
• Inlet connection washers with integral filters. 
• 115 Litres (25 gallon) cold water tank capacity recommended. 
• Pump required 230volt AC supply fused at 3amps via a double pole isolator with contact gap of at least 3mm. 
• Pump fitted with mains supply cable. 
• Pump must be protected by a 30Ma RCD (Residual Current Device). 
• For optimum performance pump should have dedicated hot and cold water supplies direct from cold water tank and hot 
water cylinder (preferably using an Essex flange on hot water cylinder). 
• Under no circumstances should the pump be connected to mains water supply. 
  
Guarantee: 2 years covering manufacturing faults.  

FAQs (2)

Do you have a question regarding this product?
Call us directly 0131 538 4343 or click the button to ask us a question.


Ask a Question

REVIEWS (1)

Have you purchased this product from Shower Doctor?
Why not leave a review here and help other buyers that are looking.

Submit a review for this product
Bristan Shower Booster Pump by John Scallan