This question is regarding Bristan Osborne Thermostatic Shower With Rigid Riser - Shower Spares

Bristan shower unit

How do you get the cartridge out, do you have to take the all unit from the wall or can you get it of from the front. If posible could you send me an exploded view of the assembly set please.



Many thanks



David Popple
Asked 13 years ago by Anonymous

Remove the front plate with the two Allen screws the cartridge should just pull out.

If not remove the plug from the body (Opposite side from the riser )you should then be able to get a screwdriver in underneath the cartridge and leaver it forward and out.

 

You can also remove the two inlet elbows this will allow you to get two screwdrivers in to the rear of the cartridge to lever it forward

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Bristan Osborne Thermostatic Shower With Rigid Riser - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Bristan Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Bristan Concealed Shower Valves

For any other support request please get in touch.