identifying replacement shower cartridge

Hi, The concealed shower valve is leaking from the cartridge and I would like to replace the cratridge. There are no markings to identify the make / model but having had a scroll through the website I think it might be a Bristan Thermostatic cartridge (cart 5) for the 'prism' version. Are you able to advised based on the photo I have attached.
Asked 8 years ago by Katie
Yes the one in the photo is a Cart 5

Remove the front plate with the two Allen screws the cartridge should just pull out.

If not remove the plug from the body (Opposite side from the hose)you should then be able to get a screwdriver in underneath the cartridge and leaver it forward and out.


You can also remove the two inlet elbows this will allow you to get two screwdrivers in to the rear of the cartridge to lever it forward.


Finally if it is a recessed mounted valve and you can’t get to the plug or inlet elbows.


Remove the front plate with the two Alan screws, then reassemble the knobs loosely you should then be able to fit two screwdrivers in behind the knobs and lever them forward against the valve body.

Answered 8 years ago by Anonymous

View Product and Order Online:

Do you require any further help with Tap or Shower Cartridges?

Please click the following link if you would like to see other answers or ask a question regarding the Bristan CART5 Dual Control Thermostatic Cartridge - 06732COMPL

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Bristan Cartridges page. Alternatively, if you're looking for any other brands you should view our full range of Cartridges.

If you would like to buy this cartridge or look others from the same brand, please view our Replacement Bristan Cartridges (All)

For any other support request please get in touch.