Bristan Tulsa loss of pressure
The pressure on the shower has seriously reduced. I have access to the back of the shower if there is a need to replace any parts.
May I have your advice.
As the shower is built in to the shower room and tiling I am reluctant to replace it in its entirety.
Thank you and regards
Paul
Check that the showder hose is not kinked or collapsed internally and the shower head is clear.
If they are ok then check that inlet filters are clean.
If all above are ok would recommend stripping the valve down and fitting a seal kit
Any parts required can be ordered online via the link below
www.showerdoc.com/bristan-tulsa-thermostatic-shower-with-adjustable-riser-chrome-shower-spares
Answered 9 years ago by Anonymous
View Spares and Order Parts:
Bristan Tulsa Thermostatic Shower With Adjustable Riser - Chrome Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Bristan Tulsa Thermostatic Shower With Adjustable Riser - Chrome - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Bristan Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Bristan Concealed Shower Valves
For any other support request please get in touch.