Triton Aquatronic leak
Also this took 2 hours so far, including finding the water stopsocks, and a torch., and also removing the tiny piece of old carbon brush (4mm?) that fell into the motor. Top tip - apply a dust sheet to the bath / shower tray to catch the carbon dust - I didn't, they were filthy.
I am not sure I follow you, however......
To replace the brushes you are correct you have to removethe motor and pump unit.
You will need to remove the screws that hold the pump inplace also the solenoid screws, you will need to slacken off the screws (Butnot remove) the screws that hold the temperature valve in place.
When refitting make sure that all the ‘O’ rings are properlyin place, this is the most common fault when you are pushing the parts backtogether you must make sure that they all enter each other absolutely squarely ifnot then the ‘O’ rings have a tendency to roll back, which will cause them toleak.
Answered 11 years ago by The Shower Doctor
View Product and Order Online:
Carbon Motor Brushes (IN Brass Casing) (Pair) - HYDR-01102
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Carbon Motor Brushes (IN Brass Casing) (Pair) - HYDR-01102
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Other Brands Motor Brushes Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Other Brands Motor Brushes
For any other support request please get in touch.