triton t90si
T90si, water will flow continuosly on cold setting.
When set to any of the warm settings the water will stop in midflow after a few minutes with motor still running.
After being powered off for a good length of time. The whole process can be repeated.
Regards
Pat
It may be your solenoid valve, you can check it if you have a multi meter, you should have a reading of at least k3.5 ohms, across the two terminals any less and you need a new valve. (Check the valve in the failed state.) (When it has stopped working!)
If there is power getting to the solenoid and it is not operating then there is a good chance that you have a faulty solenoid.
http://www.youtube.com/watch?v=NzJjzWqxesc
The video is intended as a guide and does not cover every shower.
http://www.showerdoc.com/triton-solenoid-valve-22009110
Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses and letting you know much power you have left in batteries
(So you will know if they are good or not) and lots of other jobs, in short they are well worth a few pounds
http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester
Answered 11 years ago by The Shower Doctor
View Product and Order Online:
Carbon Motor Brushes (IN Brass Casing) (Pair) - HYDR-01102
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Carbon Motor Brushes (IN Brass Casing) (Pair) - HYDR-01102
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Other Brands Motor Brushes Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Other Brands Motor Brushes
For any other support request please get in touch.